Peterr for Model Number Frigidaire GLTF2940ES3 Hi, This washer worked normally and now doesn't spin. It just stops with water pumped out. I ran the diagnostics and everything works fine until the spin test. It stops with E43. I tried replacing the door latch as many suggested, but the problem still exists. I'd really hate to replace the control board only to find it is fine too. I check it visually and didn't see any burned or damaged components and all other functions seem to work fine (wash), so its not obviously bad. Thanks, Peter
Answer Hello Peter. If the door lock is new, and according to the code, it is a bad board. If you order the board from us, and it does not fix the issue, you can return the part. You can ohm out the motor and see if it is good. If so, replace the board on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Tuesday, January 29, 2013