Jeff for Model Number 790.46352400 I have an 18+-year-old Kenmore slip-in range model number 790.46352400 that the oven stop heating up. We noticed it when we noticed the clock on the control board was not lit. Our electricity had not gone out so I checked the house circuit breaker box to discover the stove breakers had tripped. I reset the stove breakers and the control panel lit back up. The stove top elements are all working normally. So I know I am getting 220 v to the stove plus the house breaker did not trip again. Now everything works except the oven does not heat in broil or bake mode. I have check and replaced the temperature probe which is showing 1096 ohms and doing so all the way to the control panel plug. I checked both oven elements, the lower is showing 18.3 ohms and the upper is showing 20.2 ohms. I check the fan thermal cut off and verified it by putting a heat gun on it to 200 degrees F and the fan kicked on. Is there anything else I can check before replacing the control panel? Is there a procedure I can use to check the control panel out?
Answer Jeff, if there is not a broken wire, the failure is in the control 318185446 based on the information provided. Read More... Answered by AppliancePartsPros.com | Friday, May 3, 2024