Richard M for Model Number JGP940 BEK2BB Constant sparking at all burners. Tried to "heat" the switches with a hair dryer, no luck, still sparks. Also tried to segregate each burner by disconnecting each , one by one, burner at the module. The sparks jumped across the module and couldn't determine which or if it is a switch on the harness of the spark ignition switches. Please advise the proper item(s) needed to repair Thanks, R McEvoy
Answer Richard, Disconnecting the electrode wires, is not going to pin point the problem. You need to test for 120 VAC on the end of the red wire at the spark module to chassis ground, with all the switches in the off position. If you have voltage on the wire, you have a bad switch and need the WB18T10452 switch abd harness assembly. If you have no voltage on the wire, then you need the spark module WB13X46909 Read More... Answered by AppliancePartsPros.com | Tuesday, October 30, 2012