Keith for Model Number Ge GTDP300EM0WS Dryer does not heat and timer didn’t not advance. Replaced timer but dryer still does not heat.
Answer Hi Keith, thanks for your question. If you’re getting 240 VAC when checking between the red and black wires at the terminal block where the dryer’s power cord connects, then any of the following parts could be responsible for the no-heat issue:Temperature switch (AP4344737)Safety thermostat (AP2042573)Inlet thermostat (AP2044414)Cycling thermostat (AP2042618)Heating element (AP5809968)Motor (AP5958529)With the dryer unplugged, here’s what you can check:Timer: Test for continuity between terminal B and terminal A while set to a heat cycle. It should have continuity.Temperature selector: Should show continuity between terminal 15 and terminal 16 when set to allow heat.Safety, inlet, and cycling thermostats: All should have continuity at room temperature.Heating element: Test each coil for resistance — they should each read about 21–22 ohms.If everything above tests good, then the motor is the most likely cause of the heating failure. Read More... Answered by AppliancePartsPros.com | Thursday, November 13, 2025