Hua for Model Number LRE 30451SB/02 The F-1 code came after I ran a self cleaning cycle. At beginning, I cleared the code by press the clear button, then tried to turn on the burners, was able to use one at a time, not two burners at same time, while the f-1 code came back in a few minutes, clear it again and again, some oven buttons worked. First attempt: Turn off the power, open the back, I cleaned ribbon cables, make sure put them back all the way in, pulled some connectors out, then back in. turn the power back, pf showed on keypad on all the burners, press on/off buttons, pf disappeared, time shows on the display, but all the other buttons are not working anymore! f-1 code comes back in a few minutes again, clear it off, comes back in a few minute..., only on/off buttons work. Second attempt: Turn off the power, disconnected the ribbon cable, turn on the power, the pf showed on all the burners, and PF showed on the display too, wait for a 5 - 10 min. the f -1 code doesn't come back! Does it mean the temp sensor is still good? Any suggestion as to which part should I try to replace first? Thanks.
Answer Hua, The F1 error does not have anything to do with the oven sensor as being the issue. This would be a faulty touchpad that will need to be replaced. Read More... Answered by AppliancePartsPros.com | Wednesday, April 22, 2020