Archie for Model Number DMT-400RHS/XAA My dishwasher case sensor filles up with water until water hits top then pumps it back out. I put a new case sensor DD94-01006A on as well as the Break case DD94-01005A and no differance now what????
Answer Hello Archie. It should put the water into the tub and not fill up the case assembly. If it is filling up the case assembly then the fill system of the dishwasher needs to be checked for a blockage. If it over fills the tub, then check the water valve to see if it is stuck open. If not, then either the wiring harness is bad or the control board is bad on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Friday, November 4, 2016