Tim for Model Number samsung WF45N5300AF/US The machine won't unlock after a cycle. I replaced the door switch assembly and it still isn't unlocking. It seems to wash fine, it just won't unlock the door when it's done. I tried draining the tub and that had no effect. At this point, should I replace the sensor board? Thanks for the help!
Answer Hello Tim, thank you for contacting APP,It is possible that the unit is not seeing the tub as having stopped or being properly empty of water, thus preventing the door from unlocking. The 1st thing I would recommend to try is running the Self-Clean+ cycle located on the right-hand side of the display, this will flush the pressure and drain systems to remove any detergent residue and/or other debris that has built-up in the system, I would also recommend to add about 2 cups of White Vinegar to the unit before you run the Self-Clean+ cycle to aid in removing any detergent residue. If the issue continues after running this cycle I would recommend to have the Diagnostic Mode run, and the system checked for any error codes that may have been generated due to the issue. Read More... Answered by AppliancePartsPros.com | Thursday, May 30, 2024