Kevin for Model Number GW395LEPS00 Our Whirlpool oven is giving an E0 F3 error. Recently replaced oven temp sensor and problem went away for a couple days only to return recently. Today the oven was set to bake at 350 and overheated with control panel and surface very warm to the touch.
Answer Hello Kevin. Oven sensor opened. 1. Unplug range or disconnect power. 2. Disconnect sensor from harness. 3. Measure sensor value (between connector pins) between 1000 ? @ 0° C (32° F) and 2697 ? @ 482° C (900° F), (room temperature approx. = 1080 ?). Also measure from sensor connector to sensor casing for possible short. If measurements do not correlate to real temperature, or if short is found, replace sensor. 4. Trace the wires and connectors to the sensor from control, and back to control. If wire or connection is damaged, replace the harness. 5. Reconnect the sensor to the harness. 6. Plug in range or reconnect power. 7. Press BAKE and START/ENTER. Observe for longer than 1 minute. If failure remains, go to step 8. 8. Unplug range or disconnect power. 9. Replace control. Read More... Answered by AppliancePartsPros.com | Wednesday, June 22, 2016