Lloyd for Model Number Whirlpool Range GLP85900 I changed the oven sensor as the ohm readings were all over the place. With the new sensor installed I turned the oven onto bake to start the bake cycle, the timer shows a count down of 5mins 15 seconds, after the time is counted down the oven is only about 100 degrees F. It took almost a full hour for the oven to heat up to 350 degrees F. The oven can be heard to cycle off and on with both the old sensore and the new replacement sensor. What should I check next or what needs to be replaced, the stove was purchased new in 2003?
Answer Hello Lloyd. Based on the information you provided, you will need to check and see if the bake element WP9752294 is good. It should read closed for continuity. If it is bad, it can cause the problems your having. Hope this helps. Read More... Answered by AppliancePartsPros.com | Monday, October 10, 2011