Ben for Model Number GJSP84902 Hi. Actually I program the Oven to a preset heating and when I verify (with manual thermometer) the temperature is not at the preset heat Ex: 250 is really 160...400 is really 340...450 is really 350 and for all theses temp. the heating time cycle stops to confirm that the oven is ready. Only when I preset 500 the oven continue to heat but the temp not up more than 400. Is it the sensor ?
Answer Hello Ben. Test the sensor WP9782081 and see if it is bad. It should read around 1100 ohms at room temperature and around 1650 ohms at 350°. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Friday, December 2, 2011