Sawyer for Model Number Whirlpool Electric Oven #?? When set to "Bake", the bake element comes on during pre-heat, (glowing red), but after the pre-heat cycle it does not turn on. On "Broil" the upper broil element functions normally. No error codes are displayed.
Answer Hello Sawyer. You will need to do the 10 minute test. Preheat to 350°. Then test the oven sensor and see if the ohms goes down from 1650 ohms. If not, replace the sensor. If it does, replace the control board on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Wednesday, September 12, 2012