Ray for Model Number MAH8700AWW I am getting an nd code and washer is not draining all the water. Unit will not spin. I have checked all hoses, replaced the pump and still getting same results. Pls help
Answer Hello Ray. If the hoses are clear, and the pump is new, and the wiring is good, and no power to the pump, you will need to replace the control board 34001494 in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Wednesday, June 13, 2012