Kevin for Model Number ATW4475VQO I have an Admiral washer that fills and washes in hot only even when set on cold or cool wash/rinse positions. I replaced the Temp Switch, Water Inlet Valve, and Timer in an effort to resolve the problem. The washer will not fill on the 3 cold/cool settings with the new Temp Switch, yet will with the old Temp Switch. Can you offer any viable advice?
Answer Hello Kevin. According to the wiring diagram, yellow/red is the hot wire for the cold water valve. You will need to test and see if you have power across the white wire and the yellow/red wire at the ATC switch WPW10184148 with the unit on a cold fill. If so, you will need to look and see if there is a broken or burnt wire or trace and see where your loosing the power to the valve at. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Saturday, July 2, 2011