Dave for Model Number mlg2000 Yesterday i asked a question. I replaced my timer, my control board, and i did try the pressure switch, none of these fixed it, I had the machine almost completely disassembled and never found the hose that was recommended. From what i have read the the hose is directly connected to the pressure switch. Not on mine. Any other ideas. I am almost at the point I going to order anything that i can that is available and start swapping out parts until I find it. This machine has got me so frustrated. Thank you again. Dave.
Answer Hello Dave. If you look at the diagram, the pressure hose 22002483 is number 19. Your washer has to have one of these, or it will not operate. The hose goes from the tub assembly to the pressure switch. If yours is missing, you will need to order the hose and install it on the switch and the tub assembly. No washer made can run correctly with out a water level switch. It has to have this on it. Here is a link to the diagram we are referring to. Hope this helps. http://www.appliancepartspros.com/partsearch/model.aspx?model_id=47168&diagram_id=28484715 Read More... Answered by AppliancePartsPros.com | Friday, October 7, 2011