Customer Questions and Answers for Clock/Overlay (Blk) by Whirlpool

Rob, If the igniter WP7432P136-60 stays on, even after you cancel a cycle, Then the clock/ERC WP74008629 would be the place to start. You could have a stuck relay, but you should have an error code in the display. If the igniter glows when you start a cycle, and shuts off when you cancel the cycle, then you'll need to check the amp draw of the igniter with an ammeter, to see that it draws at least 3.2 to 3.6 amps. and check the oven safety valve 12002604 and wiring for a shorted bi metal switch in the valve, or shorted wire to chassis ground completing the circuit and causing the igniter to stay on.