Tom for Model Number ghw9100lw1 Machine washes, rinses, pumps out water, but does not go into spin cycle. What to check out to determine problem?
Answer Hello Tom. You will need to test and see if the motor control board W10756692 is sending power to the motor during the spin cycle. If so, and the motor does not spin, replace the motor. You can test the motor before replacing it as well. It should read around 6 ohms across pins 1 and 2, and then 2 and 3, and last, 1 and 3. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Wednesday, March 7, 2012