Miguel for Model Number KUDI01TJWH0 My start button has stopped working. Initially it is difficult to start, I have press repeatedly, and use different sequence such as normal-cancel-start, and now it is completely dead. What works: - Drain/Cancel button works. - Diagnostic works, all light flashes. - Fuse works. - Door switch works. - Pin P1-12 and P1-4 works in that when start button is pressed, a resistance is shown (1.5k using the diode setting on the multimeter). I has the same reading when I measure the corresponding pin's when the drain/cancel button is pressed. - When in lock mode and start button is pressed, the lock light flashes which means the machine knows that the start button is pressed. - The control board works as I have changed the board. I am at a loss where is the problem. I have read from other people that when the "contact" is cleaned, it works again. But the button contact is sealed, there is nothing to clean. Could that be the contacts between the ribbon cable and the control board?
Answer Hello Miguel. You will need to order and replace the control panel on the unit. Read More... Answered by AppliancePartsPros.com | Tuesday, January 21, 2014