Jill for Model Number KUDI01ILBL6 Hello, Regarding the problem first described below, we replaced the fuse (without obtaining a multi-meter first, since the fuse was relatively inexpensive) but it turns out it was not the fuse. What would you suggest we try next? Thanks so much for your help Hi, the dishwasher stopped working mid-cycle. No lights on control panel. They flashed once when I opened and closed the dishwasher, but then everything shut down. Thanks for your help. Jill for Model Number KUDI01ILBL6 Answer Hello Jill. You need to check and see if the fuse 8193762 is bad on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read more: http://www.appliancepartspros.com/whirlpool-panel-cntl-8531816-ap3726665.html#ixzz2EHKA2l2Z http://www.appliancepartspros.com
Answer Hello Jill. If the fuse did not fix it, you will need to look for a loose connection and make sure there is 120 volts coming to the control board. Also, check the door switches and make sure they are good. If all is good, replace the control board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Thursday, December 6, 2012