Michael for Model Number DU1055XTSS I have a problem dishwasher will not start. Panel lights up push start button and heated dry light comes on. Will not start. Replaced BI Metal fuse was not the problem. How can I chech the heating element? Without pulling the unit out from under the sink. It will be very hard to do.
Answer Hello Michael. Lay in the floor and remove the toe panel and make sure power is off reach back and remove wires from element. Then use the meter leads and test the element. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Thursday, December 12, 2013