Jonathan for Model Number GR460LXLB1 On my Whirlpool Stove I have no power to the display panal when everything is off. That includes no power to the light inside the oven when you open the door. However when you turn a burner knob to the on position it does the initial power up on the display then giving you the power failure message. But it still does not provide any power to the burners. Power is supplied to the light inside the oven as well when you turn a burner know to the on position. I am wondering if it could be a possible meltdown of the transformer or something else on the power supply? Also the non-resetable fuse on the brown wire between the oven control and the power supply looks to be intact with no signs of melting or burn marks on the fuse glass. Thank you for your assistance.
Answer Hello Jonathan. Yes, based on the information you provided, it sounds like the pca WP6610333 is bad and will need to be replaced. You can test and see if it is sending power out of it to be sure if you need it. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Monday, November 14, 2011