Shelia for Model Number kenmoreHE2plus11047532601 We are having problems with our washer. First we started out with it would wash but when it got to the final spin out, it would not get up to high speed spin out, so the clothes were wet. We have replaced the washing machine water pump and the hose tub/pump (wpl8540012) just for good measure.(It showed a little wear around the ball, we changed it so we knew it was getting a good seal.) We checked all the hoses for clogs, there were none, but we took them off and cleaned them to get all soap residence off. The washer will start and the tub will turn for a little while they it does nothing. you can hear a slight hum but i don't know where it is coming from. I also have checked the belt for wear, looks fine, but i purchase another just in case, but when we installed it, it was very tight and the washer did less so we took it off and replaced the old one.(It does not sound like it is slipping and the belt motor spins with you hand with the belt off. I talked to a rep here and she said she thought the problem was the the belt motor. ( The motor runs, she replied there is a switch on the motor that may be bad. Then doing research on your and other web sites, the motor central board W10163007 or the machine main control board W10525354 could be the problem. All these parts run around $200.00. Which is ok but i cant afford to trouble shot each one till i find which one the problem is. Can you please give me any advise???? I have been with out a washer for a month now, and have been trying to fix it myself, and the cost is adding up fast, and still no fixed washer. Thank you for you time and assistance. It has also showed code F-28 and F-11.
Answer Shelia, With the F11 and F28 code both popping up it would be recommended to replace the main control board. Read More... Answered by AppliancePartsPros.com | Thursday, March 10, 2016