Customer Questions and Answers for Electronic Control Board by Whirlpool

Hello B, This is directly from the service manual: If after 30 seconds the control does not detect water entering machine, the valves will be turned off and the error code will be displayed. OR If the control has turned the water valves on and after 8 minutes the flow sensor has detected 10.5 gallons of water passing through it, but has not detected the pressure switch trip, the valves will be turned off and the error code will flash. Press PAUSE/CANCEL twice to clear the display. It sounds like you either have debris in the pump, a bad connection between the pump and main control at the top of the unit or a bad pump.