Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Motor Control Board by Whirlpool

4.89 (64)
By: Whirlpool
Part Number: OEM18062073
Manufacturer Part Number: WPW10384846

This electronic board regulates power and speed to the washer's drive motor, working with the main control to coordinate agitation and spin. Replacing a failed motor control unit restores consistent drum movement and resolves no-spin or no-agitate issues. What it does:

  • Governs motor start, direction, and variable speed during wash and spin
  • Common failure symptoms: won't spin or agitate; starts then stops; intermittent or slow rotation
  • Visible burn marks, odor, or damaged components on the board
  • Verify power, wiring, and motor condition before condemning the board
What's included:
  • One motor control board
Install notes:
  • Disconnect power and turn off water before service; allow components to discharge
  • Use ESD precautions and handle the board by its edges
  • Access location varies by model; photograph connectors and transfer them one at a time
  • Inspect the drive motor, wiring harness, and drive components for shorts before powering up; run diagnostics after installation

More
$304.90

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Questions & Answers

For Whirlpool Motor Control Board (Part Number: OEM18062073)

View all Questions

Answer

Denver,

The F25 error code on this mode is a drive motor tachometer error. This information on testing can be located on your tech sheet inside the unit. If the control is unable to properly detect motor speed, the washer shuts down. If a failure occurs during high-speed spin, the door unlocks after 3 minutes. Possible Causes/Procedure
Verify the shipping system including shipping bolts, spacers and the
power cord are removed.
Unplug washer or disconnect power.
Check the drive motor tachometer resistance.It should be
approx. 115O between motor connections (see pg. 13 motor
connection diagram).
Check wire harness connections between the drive motor and the
Motor Control Unit (MCU), and between the MCU and the Central
Control Unit (CCU).
Plug in washer or reconnect power.
Check the MCU by looking for operations of the drive motor.
Check the drive motor for powered rotations

Read More...

Answered by AppliancePartsPros.com   |   Thursday, April 21, 2022

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro

Share your thoughts with other customers

Answer or comment
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google