Kd for Model Number KUDI01TJWH0 The cancel drain button just keeps blinking and the other buttons aren't working. I ran diagnostics successfully (all lights working) but after starting with settings of Normal / Air Dry it would just cycle for a few minutes, then drain with cancel drain light on, then just stop. After turning off breaker for 20 minutes and cleaning the control board strap with alcohol the cancel drain is just blinking and won't turn off at all.
Answer Hello KD, While you may not have hurt the ribbon cable, hard to say for sure, it is not recommended to clean the ribbon cable with any solvent. The recommended method of cleaning it is by rubbing it only in the direction of the traces toward the end of the cable with a regular pencil eraser. This will leave no residue like alcohol will and as long as the eraser rubs the ribbon along with the traces, will not separate the traces from the ribbon. The complaint you describe is most likely going to be a stuck button on the control panel WP8270224. When a button is stuck, the light above the stuck button will flash, as described on the tech sheet. Read More... Answered by AppliancePartsPros.com | Monday, October 29, 2012