Bob A for Model Number 665-16019400 Kenmore The clean light on my dishwasher was blinking, after diagnosing that the control board needed replacing, I replaced the control board and the machine worked fine for about a week. Now no lights come on and the dishwasher does not respond.
Answer Hello Bob. Make sure all connections are good. If so, check and see if the fuse 8193762 is bad and will need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Thursday, December 26, 2013