Paul for Model Number 66517024402 Like the second question above, the 'done' light flashed. I did the reset and the washer worked for about a week. This time, nothing worked and there were no lights. I have power to the junction box at the base of the washer. I ordered the replacement control panel and installed it. Still, nothing works. I believe I installed the panel correctly. Is a blown fuse possible? If so, what would be the test to see? Thanks,
Answer Hello Paul. You can test the fuse 8193762 and see if it is bad. It should read closed for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Saturday, July 23, 2011