C for Model Number GU2400XTP6S I have had multiple problems with my quiet partner III. The console panel had been partially malfunction for some time and finally failed so I replaced it about 8 weeks ago. The washer ran fine for 2 weeks then failed completely. Replacing the main fusable link resolved this issue. Today The unit will not start. I tried the reset cycle and it did run the drain cycle for 2 mins. No button or light is on except pressing the "rinse only" button will light that led and the horizontal segments in the timer display. Pressing start does nothing. Also pressing the "soak and scour" button causes that led to light but nothing starts. Neither light stays on for longer than 20 secs.
Answer Hello C. Check and see if the ribbon cable for the control panel is damp. Also make sure it is seated good. if it is ok, you will need to check and see if the door latch switches WP8269209 are good on the machine. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Tuesday, August 2, 2011