C for Model Number GU2400XTP6s Followup to previous Q & A I have had multiple problems with my quiet partner III. The console panel had been partially malfunction for some time and finally failed so I replaced it about 8 weeks ago. The washer ran fine for 2 weeks then failed completely. Replacing the main fusable link resolved this issue. Today The unit will not start. I tried the reset cycle and it did run the drain cycle for 2 mins. No button or light is on except pressing the "rinse only" button will light that led and the horizontal segments in the timer display. Pressing start does nothing. Also pressing the "soak and scour" button causes that led to light but nothing starts. Neither light stays on for longer than 20 secs. Asked by C for Model GU2400XTP6S Hello C. Check and see if the ribbon cable for the control panel is damp. Also make sure it is seated good. if it is ok, you will need to check and see if the door latch switches Checked connector, cleaned with alcohol swab and reconnected, confirmed door switches are good and adjusted properly. Any other suggestions?
Answer Hi C. All research shows that the control board and the wiring harness going to the fuse need replaced. This control is part # WP8564547. The wiring harness is part # 8193762. Thank you. Read More... Answered by AppliancePartsPros.com | Wednesday, August 3, 2011