Kt for Model Number GU2200XTSB1 My dishwasher will stop in the middle of a wash cycle and the clean light will blink. I've reset it with heated dry-normal-heated dry-normal-cancel and that works, but it's happening more and more often. I'm not sure if I should replace the control board or the control panel to see which would help. Thank you for any help!
Answer Hello KT. Make sure you are getting the water hot every time before a cycle at the sink. If not, that could be the issue. If you are, it sounds like the board is bad if the element and thermostat test good. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Thursday, January 16, 2014