Joe S. for Model Number Kitchenaid dishwasher KUDK02CRBS1 I have no lights on the keypad. I checked 1. The thermal fuse. 2, The door latch. 3. the continuity of the relay board on the control panel and 4. the continuity of the ribbon cable between the control panel and the control board and all are fine. I replaced the main control board. When the power was turned on the control board "clicked" and the dishwasher started to drain, then nothing. Disconnecting/reconnecting the yellow plug in the control board started to fill the washer. This seemed to work only once. What else could be the problem since the keypad is still dead?
Answer Hello Joe. Check and see if the inner connect WP8531873 is bad. If it is good, then make sure the ribbon cable WP8531877 is good. If so, replace the control panel WP8572349. Read More... Answered by AppliancePartsPros.com | Thursday, April 14, 2016