Charlie for Model Number Whirlpool GU3600XTSY2 My Whirlpool Quiet Partner IV Dishwasher does not start. The model number is GU3600XTSY2. After I discontined and reconnected the power to the dishwasher, the "Power Scour" light was blinking. And when I pressed "Cancel" or "Start" button, the "Power Scour" light stays blinking, "Pots & Pans" and "Normal" lights start blinking as well. Now three button lights are blinking. If you now press any buttons, no more response from the dishwasher, except the three blinking lights. Your helps are greatly appreciated. Charlie
Answer Hello Charlie. Check and make sure the door switches are good. If so, make sure the ribbon cable from the control panel to the control board is clean and dry. If so, you will need to replace the control panel WPW10021180. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Monday, August 15, 2011