Brysteve for Model Number GU2700XTSS1 I have the whirlpool gold quiet partner iv that is only 3 1/2 years old. The pots and pans setting has been a constant flashing green light and sometimes adaptive wash and normal wash will flash with the pots and pans light for a total of three flashing lights at one time. The machine has been reset several times and i have had two different appliance techs come over to try and fix it and end up leaving with no fault found. The machine will work but will stop in between causing me to have to press random buttons to get it to start working. what needs to be replaced, the panel or the board???....please help.....thanks
Answer Hi. Use the supplied service manual in the toe kick or in the control panel area. It will lead you to the diagnostic code which tells the circuit that is effected. Make sure all wires are tight and clean. The most common reason of the constant blinking is that the Optical Water indicator (turbidity sensor) is either sensing the unclean water or the thermistor is out of value. Make sure that you run the water at the sink while loading it to fill with a fresh hot wash. Incoming temperatures have to be at least 120°, if not then you need to get a qualified plumber to raise it. Test the sink tap water with a thermometer. This effects the cleaning. It will benefit you to use the dishwasher magic monthly to clean internal pump and externally inside of the tub. Use a wet ship vac to disassemble the unit down to the chopper blade and flush out the wash arms and parts under the sink. Replace as necessary. These blinking lights can be because your unit is too dirty and the sensors is having a hard time... This cleaning will insure the proper water pressure to all wash arms. Let us know what evolves from there or if this cleaning repairs the codes. It will be a lot cheaper then throwing in a board. Thank You. Read More... Answered by AppliancePartsPros.com | Friday, March 2, 2012