S.R. for Model Number DU1055XTSS0 Hi. Dishwasher stopped working. When we plug machine in, it makes a noise, just like it used to before the wash cycle but nothing after. No lights on control panel.Replaced Thermal fuse - no effect. Your panelist suggested part # AP4309110. Q1: would this be the right part? Q2: does the part come with instructions and is it easy to install?
Answer Hi SR. Use a volt/ohm meter part #@ MA-DM1 to assist you in your diagnostics. Use the supplied wiring diagram in the toe kick panel or in the control panel area to flolloe the wiring from the junction blox ,up through the switches and to the board through the fuse. If you have the power up to the board with the latch tripped, then yes you need to replace the control panel part # WPW10084141. If you already replaced the thermal fuse then just remove all body static by discharging a few times on the bare metal frame a few times. Note all wiring. Onl;y replace one connection at a time. User the tech sheet for the wiring diagram. The noise concerns me that you have a dirty pump and sump assy. See if there is a bone or debris holding the chopper blade assy or the impeller seal assy tight. We are here to assist. Thank You. Read More... Answered by AppliancePartsPros.com | Saturday, May 5, 2012