Travis for Model Number kube40cvbl2 I push normal wash and start/resume button the wash button comes on and starts. in 5 to 10 seconds the wash button goes out and the start/resume button blinks.
Answer Travis, You'll need to check and make sure the door switches and wires are tight and there is no excess "play" in the door latch assembly "Won’t Run and LED for Start/Resume Key is Blinking Slowly - By design, if the door is opened or power is interrupted during a cycle, the user must press the Start/Resume key to resume operation. - Start/Resume key not responding. - Control detected door switch problem.". You'll also want to check the supply wiring in the junction box, Make sure all three connections are good and tight, no arc marks or discoloration on the wiring or connectors. A momentary loss or reduction to the power supply can create a similar situation. If alls OK, then repalce the control panel / keypad assembly WP8572354. Thanks Read More... Answered by AppliancePartsPros.com | Monday, November 19, 2012