Paul for Model Number 665.13182k802 I have dirty water left in the bottom of the dishwasher at the end of the cycle, I have tried the diagnostics sequence of heated dry, wash 3 times and it runs through the cycle. When will the lights blink the code? At the end? I have no blinking lights and I replaced the pump and it ran right once and then started up with the dirty water again. What should I check next?
Answer Hello Paul. Make sure none of the hoses are clogged on the unit. If they are clear, we will test for power to the pump. If there is power there, and it does not drain, replace the drain pump on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Tuesday, April 30, 2013