Customer Questions and Answers for Electronic Control Assembly by Whirlpool

Hi Jim. Press cancel to reset the unit for a new cycle. It will initiate a drain/pump out and then turn off. Double check the float switch to insure the float stem is properly placed on the float switch. This will allow the water valve to fill the tub. Double check the ribbon cable to insure that it is not pinched and tightly connected. Make sure the child lock is not on. Make sure the unit is level and the door latch/switches are engaged when closed. Are your electrical supply wire nuts tight in the electrical box. Behind the toe kick panel is a tech. sheet which provides info. how to initiate a field service test. Please let us know if we can help further. Thank you.