Stan for Model Number Kenmore 66517772990 Hi, When I press Start there is a long delay 2-3 minutes before dishwasher starts, but no water in tank. I pulled the wires from the inlet valve connected to voltmeter and restarted. No voltage going to valve solenoid. I assume it's the control board #9744483. Your thoughts. Thanks, Stan Also, this whole problem started with a flood. The tank overflowed during a wash. I cleaned the overflow/float and finished "that" wash, but it didn't work after that. Now I have the condition I described at the top of this email.
Answer Hello Stan. You will need to check for stuck float or a bad float switch on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Thursday, May 12, 2016