Lolo for Model Number Kuis185jbl0 Had to turn it off. Was cycling.. Getting very hot. Not cooling down at proper cycle. Making ice. Then grid with slab heated up and dripped water melting the already created ice below. I have replaced the pump 4 years ago and re-wired one direction of the wire cutter. (Any chance the cutter wires are crossing something causing this issue?) Would love to keep the machine functional. But a little afraid. Last time got really hot and blistered paint on adjacent kick board.. Would consider a new panel but concerned it might not be the issue. And although I am handy can't find any details on how to do this panel circuit board. Your advice please. Thanks
Answer Lolo, If the unit is getting really hot from under the unit then you will want to check to make sure that the coils are clean and the condenser fan motor which is located behind the condenser is running. If it is not then check to make sure that it is getting power. It would have to be done when the compressor is running. If there is power to it then replace the fan if not running. Also check the cutter grid to make sure that the grid is not broken causing the ice to not cut through. Read More... Answered by AppliancePartsPros.com | Friday, May 15, 2015