Corey for Model Number 665.13159k701 Dishes won't dry and get totally clean. I dismantled the entire bottom half cleaned pump basket, screen, pulled the spinners apart wiped sprayed and cleaned each spinner ran high pressure water up each water channel cleaned cleaned and then cleaned some more. Not sure on the cleaning part yet still have it apart but as for the drying the dishes I checked the heater and it has continuity and it has 13.4 ohms on the paper work it says it should be between 10-20 ohms so I assume that is ok I checked the thermostat (assuming its normally closed) it checked out ok tomorrow I am going to pull the front of the door off and pull the ribbon cable off and power it up to see if the control panel is bad as per the owners manual says to check. All this said to ask am I missing any thing on the drying part? The only thing I haven't checked yet is the door vent yet but if the dishes aren't drying I am assuming thats not the problem. I thank you for your expertise an you help.
Answer Hello Corey. It sounds like the board is bad since the heater and thermostat are testing good. Read More... Answered by AppliancePartsPros.com | Thursday, January 9, 2014