Sandy for Model Number MER8772WS0 When selecting Bake on our Matag MER8772WS0 electric oven it will heat and get to temp. pretty quick and then post a fault detected, press start to try again. I noticed the broil element is on and glowing red all the time. We have tried unplugging for 3 minutes, then plug in and set clock and still happens. I removed the bottom oven cover that sits over the bake element and then set the oven to bake, it start and the bake element never glows, but the broil element glows the entire time. The user manual says "The bake and broil elements cycle on and off in intervals. The bake element will glow red when cycling on; the broil element will not. This feature is automatically activated when the oven is in use." I am thinking most likely the issue is the bake element, once it cools I will remove and ohm out with a meter. If it does not show open, could it be the Oven Temp sensor, or would you suspect the control board
Answer Sandy, If the element checks ok then this will most likely be an issue with the control board of the unit. Read More... Answered by AppliancePartsPros.com | Wednesday, January 3, 2018