Bob for Model Number Maytag wall oven Model CWE4100ACB10 The broil element PN : Y040000 40. heats only on one side. an ohm meter check of each side reads 40 ohms to the center post and between the outer post reads 80 ohms. All cold readings. The element seem Ok. The yellow wire one outer post and the blue on the other, with the tan wire on the center. What could be the problem? Thanks.
Answer Bob, This issue sounds like it would be caused by a faulty selector switch. All 3 wires that come to the broil element come through the switch. If the unit is set to bake then the broil element should only have one side that comes on. On the broil setting both sides should come on. If both sides are not coming on in broil then replace the selector switch WP7403P172-60 Read More... Answered by AppliancePartsPros.com | Wednesday, December 30, 2015