Jim for Model Number maytag HYG3460AWW Dryer has no flame. I replaced the igniter AP4038992, the flame sensor, the thermostats, one coil has 3 connectors, I have a reading from the center prong to the ones on the right and left. Am I missing something? What's next?
Answer Hi James. Check the coils 279834 and see if they test good. You can test the coils using a multi-meter MA-DM1. The two prong coil will read 1,000-1,300 ohms, and the three prong coil will read 1,300-1,400 ohms across prongs 1&2, and 500-600 ohms across prongs 1&3. On top of the blower hsg, there is a cycling thermostat part # WP31001088. Is the new igniter getting white hot? If the coils are old, they will open under demand. Consider replacing these if they dont ohm out as specified. The thermostats should read closed while cold. Thank you. Read More... Answered by AppliancePartsPros.com | Thursday, September 22, 2011