Don D. for Model Number Whirlpool GHW9100LQ1 Washed stops at various times during the cycle... the LED indicating time left grows dim, sort of "flashes" and the lights flicker... it is not a power issue as no other appliances in the house dim. This has not just happened once but multiple times now... I am guessing that the interface board may be going out but wanted to check... Thanks for any guidance.
Answer Hello Don. Check and make sure there are no loose or broken wires on the unit. If not, see if the user interface has power when this happens. If so, and it goes out, you will need to replace the interface. If there is no power, you will replace the CCU WP8182221. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Tuesday, April 3, 2012