Gwen for Model Number MDB7749AWW2 My Maytag MDB7749AWW2 Dishwasher will not start. I cannot get any of the cycle lights to illuminate on the left side of the panel. However, all the options on the right side of the panel appear to be working fine. I tried alternating pushing sanitize/heat dry buttons until all lights were on. It started alternating Normal/Rinse Only. After a couple minutes of this all lights came back on and would not turn off until I flipped the breaker. I removed the front cover of the touchpad where I found some gooey foodstuff which I cleaned off...some was on the 3 bottom lines of the ribbon. I cleaned with qtip/alcohol but after putting back together, it does the same exact thing. Do I have a control circuit board problem or is it the keypad/ribbon assembly? How would I check the ribbon to see if it is ok? Thanks, Gwen
Answer Hello Gwen. Based on the information you provided, you will need to order and replace the control panel on the unit. Read More... Answered by AppliancePartsPros.com | Tuesday, December 10, 2013