Gk for Model Number MAH5500BWW My washer stopped draining. It will start a wash cycle but when it gets about to the rinse cycle it does not drain and it makes a noise like it is trying to ramp up but kinda like scraping or something. Does not drain and the nd code comes up. I used a wetvac and sucked all the water out of the tub through the drain tube so there is no hose obstruction. Tried it again same thing... start a wash cycle and when it gets to rinse function it stops, nd comes up and green light starts to blink on power button. Up until that moment was solid and I can hear the wax motor locking the door. Removed pump. No obstructions but took it completely apart and the prop has not resistance when I spin it. Also I can push and pull the rotor and there is about 1/8" play and if I wiggle it side to side there is a little bit of play there also. Is that normal tolerances for a washer pump?
Answer GK, Based on the information it sounds like the issue is a faulty drain pump. Even though the drain pump looks good it could still be bad. Read More... Answered by AppliancePartsPros.com | Wednesday, February 24, 2016