Sandra for Model Number 665.17512200 kenmore ultra wash Dishwasher wont drain. Took off hose and it is not plugged. I didn't know there was a flap in the hose at the end where it connects to the disposal and I thought something was in it so I pushed something down it. It still seems to work when I blew air through it. I took apart the accumulator and the check valve is okay. I can hear it running when I do cancel to drain the water but none comes out. Should I look to see if something is stuck in the drain pump or what do I do next? The dishwasher was working fine mostly, occasionally it would leave a little bit of water in it and then I would hit cancel and it would drain. Then it started leaking and so we took apart all of this stuff to see where it was leaking but come to find out it was leaking because it had a crack in the bottom of the dishwasher because of some burned plastic. We fixed that with some plumbers epoxy but now it wont drain at all. I did take the wires off the start capacitor but I thought I put them back on the same way I took them off. What should I check now?
Answer Hello Sandra, This is probably a broken chopper blade shaft W10083957V causing the screen to stop up and preventing the unit from draining. Read More... Answered by AppliancePartsPros.com | Monday, June 25, 2012