Mr Shaw for Model Number DW7933LRASR Samsung dishwasher---code drain error--drain has been checked & cleaned out PAST kitchen sink---check valve replaced---no help--- when cycle starts machine comes on water enters and about 30 seconds water begans draining from machine---I don't have garbage disposal --I can see the water being pumped out--it repeats this 2or3 times before shuting down--it seems like it doesn't get enough water to start the cycle--could this be the water sensor is bad? any help or advice would be appreciated!!!
Answer Hello Mr Shaw. If your getting the drain error you will need to check the drain pump, water level sensor, and main PBA. The case break DD94-01005A and the flow sensor DD94-01006A is a common issue for these error codes. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Wednesday, February 14, 2018