Don A for Model Number WRF555SDFZ05 Water is dripping from the icemaker down into the ice bin. I think the ice maker is slightly overfilling and it is dripping from the lowest corner (right front) down into the ice bin fusing ice cubes together in the bin. I took the icemaker out and can't find a leak when I fill it with water. When I purposely overfill it, it drips out of the same place I see it drip when it's in the refrigerator. Is there a way to adjust how much water fills the icemaker. It is Icemaker W103000024.
Answer Don, while the ice maker WPW10300024 water flow can be slightly adjusted on the right side of the motor, it would be recommended that the inlet tube above the ice maker is checked for indications of water leaking by. The valve W11043013 would also need to be tested for 120VAC at the end of an ice maker harvest mode. If it receives voltage for more than 9 to 12 seconds, the icemaker would be the cause of failure. However, if it does not receive voltage after 12 seconds but water still comes through, the valve has failed. Read More... Answered by AppliancePartsPros.com | Tuesday, December 26, 2023