Cindy for Model Number MHWZ600TB01 EPIC Z MAYTAG FRONTLOAD WASHER I am not seeing any error codes just the add garments and everything else goes on as normal, until I press start then I hear a double click from the backside of the washer and the door unlocks then the machine turns off - or it spins over once then unlocks the door and all lights stay on.There is still water in the washer and it will not drain either...... Do you have any instructions to install these parts? If so where can I get them? Which part do you think it could be if either? Could I be missing something to check?
Answer Hi Cindy. Start a new cycle by opening and closing the door to let the control board another load is received.Does the door lock light come on? The door latch switch is part # W11417619. Can you press pause / cancel and the machine should spin and drain? Use a shop vacuum to drain water. If the pressure switch is not satisfied then it will not allow any function. Part # is W11417619. Remove power. remove the 3- torx screws (T-15/20) from the back of the top. Slide the top rearward and up to remove. Then on the front RT. back corner is the pressure switch. Part # is W11417619. Remove the hose. Blow back into it towards the tub. Did you "feel" any obstruction removed as you were blowing? Lint restrictions (plugged vent system needing cleaning) or scum build up ? Washer magic is part #W10549845. Thank you. Read More... Answered by AppliancePartsPros.com | Wednesday, September 14, 2011