Pat for Model Number MHWE250XL00 On the Maytag drawing of the dispenser parts (parts W10315510 page 5), they show that the left valve of the dual valve goes tot the middle inlet of the dispenser and the right valve on the dual valve goes to the right inlet of the dispenser. When i do that, i note that the water goes in the right side (softener compartment) when its time to wash and vice versa, so the water goes on the left side in the detergent part when its time to rinse! My question is : Can you tell me if the maytag drawing is ok or not! If its right, the problem should be the valve? Just for information, i took off the valve to take a look at it because some morning last week water flowed through the door and water level was very high. So The code error F8E3 was flashing on the washer display! Thank you! Hope that my english is clear because i'm french
Answer Pat, The way that the hoses are set up are as follows. The single valve will go to the far right of the dispenser is you are looking at it from the back. The dual valve right side will go to the middle and the other will go to the far left. Read More... Answered by AppliancePartsPros.com | Wednesday, April 2, 2014